ST at IoT World 2019: Predictive Maintenance
Find out more information:
STEVAL-BFA001V1B: http://bit.ly/IoTWorld19-BFA001V1B
STEVAL-IDP004V1: http://bit.ly/IoTWorld19-IDP004V1
STM32MP157C-DK2: http://bit.ly/IoTWorld19-DiscoveryKit
B-L475E-IOT01A: http://bit.ly/IoTWorld19-STM32L4-IoT
STM32Cube.AI: http://bit.ly/IoTWorld19-STM32CubeAI
The STEVAL-BFA001V1B is an industrial reference design kit designed for condition monitoring (CM) and predictive maintenance (PdM). The hardware development kit consists of an industrial sensor board (STEVAL-IDP005V1), an adapter for the ST-LINK/V2-1 programming and debugging tool (STEVAL-UKI001V1), a 0.050” 10-pin flat cable, a 4-pole cable mount connector plug with male contacts and an M12 female connector with a 2 m cable.
The firmware package includes dedicated algorithms for advanced time and frequency domain signal processing and analysis of the 3D digital accelerometer with 3 kHz flat bandwidth. The package includes drivers for pressure, relative humidity and temperature sensor monitoring. Audio algorithms for acoustic emission (AE) are also part of the package.
The firmware runs on the high performance STM32F469AI, ARM® Cortex®-M4, 32-bit microcontroller and the sensor data analysis results are sent via wired connectivity based on IO-Link device transceiver (IO-Link stack protocol not included). The STEVAL-BFA001V1B reference design is suitable for monitoring motors, pumps and fans, and can accelerate the development of predictive maintenance solutions.
Find out more information:
STEVAL-BFA001V1B: http://bit.ly/IoTWorld19-BFA001V1B
STEVAL-IDP004V1: http://bit.ly/IoTWorld19-IDP004V1
STM32MP157C-DK2: http://bit.ly/IoTWorld19-DiscoveryKit
B-L475E-IOT01A: http://bit.ly/IoTWorld19-STM32L4-IoT
STM32Cube.AI: http://bit.ly/IoTWorld19-STM32CubeAI
The STEVAL-BFA001V1B is an industrial reference design kit designed for condition monitoring (CM) and predictive maintenance (PdM). The hardware development kit consists of an industrial sensor board (STEVAL-IDP005V1), an adapter for the ST-LINK/V2-1 programming and debugging tool (STEVAL-UKI001V1), a 0.050” 10-pin flat cable, a 4-pole cable mount connector plug with male contacts and an M12 female connector with a 2 m cable.
The firmware package includes dedicated algorithms for advanced time and frequency domain signal processing and analysis of the 3D digital accelerometer with 3 kHz flat bandwidth. The package includes drivers for pressure, relative humidity and temperature sensor monitoring. Audio algorithms for acoustic emission (AE) are also part of the package.
The firmware runs on the high performance STM32F469AI, ARM® Cortex®-M4, 32-bit microcontroller and the sensor data analysis results are sent via wired connectivity based on IO-Link device transceiver (IO-Link stack protocol not included). The STEVAL-BFA001V1B reference design is suitable for monitoring motors, pumps and fans, and can accelerate the development of predictive maintenance solutions.
